Since the structure of LEICA Geo Office (LGO) and SKI-Pro is almost identical, most SKI-Pro questions can apply to LGO.

• Can LGO operate correctly on a Tablet PC?
• Updated   How do I transfer LGO projects, coordinate systems, and settings from one computer to another?
• Why is OPUS rejecting my RINEX data from System 1200 GPS data? Click here to download this FAQ and the necessary files.
• How do I create a user-defined ASCII export template?
• I have just received a new computer. How do I transfer my SKI-Pro projects, coordinate systems, and geoid models from my old computer to my new computer?
• I adjusted my network using control points that some were fixed in position only and some were fixed in height only. Why when I export my points to an ASCII file, I don’t see the correct coordinates for these control points?
• Where in SKI-Pro can I find the post-processing residuals like I used to see in SKI2.3?
• In SKI-Pro when I try to do an ASCII export of my points in a grid format I get a "Project contains no data to export" message.  Why?
• Where is Satellite Availability in SKI-Pro?
• I used the same point Id on two different points, how can I fix it?
• What does the warning "the averaging limit has been exceeded" mean?
• How do I transfer a SKI-Pro project from one computer to another?
• In SKI-Pro 2.5, I do not see the Processing or Adjustments tab even though I have my key lock (dongle) on my computer.  Why aren't they displayed?

Coordinate System Questions

• How do I create a state plane coordinate system (or any coordinate system) in SKI-Pro/LGO and attach it to an existing project?
• How do I transfer a coordinate system such as a state plane zone coordinate system from LGO to my System 1200 receiver?
  
• How do I create a NAD27 Canadian Coordinate System in SKI-Pro?
  Download the NAD27 Canadian CSCS models by clicking here (5.6Mb).
  Download the Maritimes' ATS77_NTV1 CSCS model by clicking here (123Kb).
• Which published coordinates should I use when processing CORS data in SKI-Pro?
• How Do I create a NAD27 state plane coordinate system to use in SKI-Pro?       
  Download the NAD27 State Plane GPSTRF.DAT file by clicking here.
• How do I install a geoid model in LGO/SKI-Pro so that I will have the ability to use orthometric heights? (Revised for System 1200)
• Which geoid model do I use in a coordinate system containing the NADCON(US) CSCS model for NAD27 2-D coordinate conversion?
• How do I view orthometric heights?
• How does SKI-Pro and System 500 apply the geoid separations in a coordinate system containing a WGS84 geoid model?
• Which types of geoid models can be used in coordinate systems to convert vertical information between orthometric and ellipsoidal heights?
• Which ellipsoid should I choose when creating a geoid model to be attached to an NAD83 State Plane Coordinate System (SPCS)?

LGO/SKI-Pro and RTK Data Questions

• While setting up an RTK reference station, I mistakenly entered an orthometric height as an ellipsoid height.  Now in SKI-Pro the heights of the points my rover collected are listed as ellipsoidal heights but I know they are orthometric heights.  How can I fix this?
• Can I make a geoid model or a CSCS model field file large enough to encompass my entire state/province?
• Can I work in orthometric heights in the field when I'm doing RTK? (Revised for System 1200)
• How do I get a 1-Step transformation created in the field to import into SKI-Pro along with my RTK data?
• I entered the incorrect reference station coordinates, how do I correct it?
• How do I change all the RTK rover's HIs after I've downloaded it into SKI-Pro?
• How do I change an RTK rover's HI after I've downloaded it into SKI-Pro?
• How are antenna phase centers handled using System 500?

SKI 2.3 and Windows 2000

• Can SKI 2.3 work in Windows 2000? Click on this link to download answer and additional files